Igmp Version; Multicast Routing-Enable - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

1.1.9 igmp version

Syntax
igmp version { 1 | 2 }
undo igmp version
View
Interface view
Parameter
1: IGMP Version 1
2: IGMP Version 2
Description
Using the igmp version command, you can configure the IGMP version number
run by the router interface. Using the undo igmp version command, you can
restore the default IGMP version of the router interface.
By default, IGMP version number run by router interface is Version 2.
All the systems in the same segment shall support the same IGMP version
because the routers are not able to check the version number of IGMP currently
running on the interface.
Example
# It is specified to run IGMP version 1 on the Ethernet interface.
[3Com-Ethernet0] igmp version 1

1.1.10 multicast routing-enable

Syntax
multicast routing-enable
undo multicast routing-enable
View
System view
Parameter
None
Description
Using the multicast routing-enable command, you can enable multicast routing.
Using the undo multicast routing-enable command, you can disable the
multicast routing.
8