Telnet Service Configuration Commands; Display Client - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
auto-execute command command, you can cancel the command to be executed
automatically on the asynchronous serial interface.
If the auto-execute command command is configured on the asynchronous serial
interface, when the user presses <Enter> twice on the external terminal connected to
the interface or logs onto the router in Modem dial-up mode and presses <Enter>
twice, the router will automatically execute the operation preset by auto-execute
command command.
For related commands, see async mode flow.
Example
# Configure the auto-execute command for the telnet 10.110.164.45 command on
Serial0.
[3Com-Serial0] physical-mode async
[3Com-Serial0] undo modem
[3Com-Serial0] async mode flow
[3Com-Serial0] auto-execute command telnet 10.110.164.45

2.4 Telnet Service Configuration Commands

2.4.1 display client

Syntax
display client
View
All views
Parameter
None
Description
Using the display client command, you can view all of the clients on the router.
If the router suddenly starts to work abnormally or its working parameters are modified,
this command can be used to display whether other administrator users are modifying
the system configuration.
The information shown via this command includes the user ID allocated by the system
and the IP address for this client.
26