Display Isdn Q931-Timer; Display Isdn Qsig-Timer - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Table 4-2 The information of command display isdn q931-timer
K
N200
T200
T202
T203

4.1.6 display isdn qsig-timer

Syntax
display isdn qsig-timer [ interface type number ]
View
All views.
Parameter
interface type number: Interface type and number. This parameter is used to display
the values of ISDN QSIG signaling timers on a particular ISDN interface. If no interface
is specified by this parameter, the values of timers on all the interfaces will be
displayed.
Description
Using the display isdn qsig-timer command, you can view the value of all of the ISDN
QSIG signaling timers.
This command is mainly intended for technical support engineers in their fault
diagnosis and troubleshooting.
For related commands, see isdn qsig-timer, display isdn call-info.
Example
# Display the values of the ISDN QSIG signaling timers on the interface Serial 0:15.
[3Com]display isdn qsig-timer interface serial 0:15
Serial0:15
Timer Name
QSIG_T301
QSIG_T302
QSIG_T303
QSIG_T304
QSIG_T305
34
Field
Outstanding I-frames on BRI port
Max number of retransmits
The retransmits timer of ISDN Q921 protocol
The TEI message resend timer of ISDN Q921 protocol
The max link idle timer of ISDN Q921 protocol
Current Value Default Value
180 180
15 15
5 5
20 20
15 15
Meaning
Unit
seconds
seconds
seconds
seconds
seconds