3Com Router Command Reference Guide — V1.00
static: Display all the static routes.
default: Display the default route.
verbose: Display the route details.
Description
Using the display ipx routing-table command, you can view the IPX routing table.
The output of this command is helpful for IPX RIP fault diagnosis.
Example
# Display IPX routing-table.
[Quidway] display ipx routing-table
Codes: C - Direct connected network, S - Static, F - Float, s - seconds, u
- uses
5 Total IPX routes.
Up to 1 parallel paths, 4 reserved paths and 16 hops allowed.
Current default route is:
S FFFFFFFE [010/02/010] via 2.0A03.0C50.0003, Ethernet0
C 2 (NOVELL-ETHER),
C 1000 (PPP),
S 100 [010/02/010] via 1000.0B00.CD00.0000, Serial0
F 10 [060/02/010] via 2.0A03.0C50.0003,
5.1.4 display ipx service-table
Syntax
display ipx service-table [ type service-type | name name | network network |
socket socket | order { net | type } ] [ verbose ]
View
All views
Parameter
type: Tthe specified service type.
service-type: Type of service.
name: The specified service name
name: Name of server.
76
Ethernet0
Serial0
10s, Ethernet0
Need help?
Do you have a question about the 3C13618 and is the answer not in the manual?