Chapter 2 Pppoe Client Configuration Commands; Pppoe Client Configuration Commands; Debugging Pppoe-Client; Display Pppoe-Client Session - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

Chapter 2 PPPoE Client Configuration Commands

2.1 PPPoE Client Configuration Commands

2.1.1 debugging pppoe-client

Syntax
debugging pppoe-client option [ interface type number ]
View
All views
Parameter
option: Type of PPPoE client debugging. Refer to the following table for details.
interface type number: Interface type and number. The parameter is defined for
enabling debugging of a specified interface. If no interface is specified, debugging of all
interfaces will be enabled.
Table 2-1 Description and type of PPPoE client debugging
Debugging type
all
data
error
event
packet
detail
Description
Using the debugging pppoe-client command, you can enable debugging of PPPoE
client.
Example
None

2.1.2 display pppoe-client session

22
Enables all PPPoE client debugging.
Enables debugging of packets at PPPoE session phase
Enables error debugging of PPPoE client
Enables event debugging of PPPoE client
Enables debugging of negotiation packets at PPPoE discovery phase
Displays details of PPPoE data
Type