Mfr Bundle-Name; Mfr Link-Name - 3Com 3C13618 Command Reference Manual

6.1.50 mfr bundle-name

Syntax
mfr bundle-name name
undo mfr bundle-name
View
MFR Interface view
Parameter
name: Bindle identification, up to 49 characters.
Description
Using the mfr bundle-name command, you can configure the bundle identification of
the MFR interface. Using the undo mfr bundle-name command, you can restore the
default value of the bundle identification of the MFR interface.
By default, the bundle identification of the MFR interface is "mfr" plus the Frame Relay
bundle number, such as "mfr0".
Each MFR interface has a bundle identification which takes effect only at the local end.
The two bundle identifications of both ends of the link can be the same.
Only after being enabled through the command shutdown/undo shutdown, can the
newly configured bundle identification take effect.
Example
# Set the bundle identification of a Frame Relay to be bundle1.
[3Com-MFR0]mfr bundle-name bundle1

6.1.51 mfr link-name

Syntax
mfr link-name name
undo mfr link-name
View
Serial interface view
Parameter
name: Link identification, up to 49 characters.
Link Layer Protocol
131