3Com Router Command Reference Guide — V1.00
View
Dialer interface view
ISDN interface view
Parameter
None
Description
Using the dialer data2voice command, you can configure an ISDN interface to initiate
calls using voice calls. Using the undo dialer data2voice command, you can configure
the ISDN interface to initiate calls using data calls.
By default, ISDN interfaces initiate calls using data calls.
You must enable DDR by using the command dialer enable-legacy or dialer bundle
before configuring this command.
For related commands, see isdn voice2data
Example
# Set the ISDN interface BRI 0 to initiate calls using voice calls.
[3Com-Bri0]dialer data2voice
4.1.3 display isdn active-channel
Syntax
display isdn active-channel [ interface type number ]
View
All views.
Parameter
interface type number: Interface type and number. If no interface is specified, all the
current call information will be displayed.
Description
Using the display isdn active-channel command, you can view the current call
information on the ISDN interface.
Example
# Display the information on the ISDN interface BRI 0.
[3Com]display isdn active-channel interface bri 0
Bri0 :
30