X25 Template - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
View
System view
Parameter
None
Description
Using the x25 switching command, you can enable X.25 switching. Using the undo
x25 switching command, you can disable the function.
By default, the X.25 switching is disabled.
The X.25 packet switch is to receive packets from an X.25 interface, and send them
from a certain interface according to the destination information contained in the packet.
When the packet-layer switching function is enabled, the router can serve as a small
packet switch.
For related commands, see x25 pvc, x25 switch pvc, x25 xot pvc, x25 fr pvc, x25
switch svc, display x25 vc, display x25 switch-vc-table svc.
Example
# Enable the X.25 switching function.
[3Com]x25 switching

5.1.43 x25 template

Syntax
x25 template name
undo x25 template name
View
System view
Parameter
name: Name of X.25 template.
Description
Using the x25 template command, you can configure an X.25 template and enter its
mode. Using the undo x25 template command, you can cancel the X.25 template and
its mode.
For related commands, see fr x25 template.
80