Displaying And Debugging Rip - 3Com 3032 Configuration Manual

Resetting RIP
Displaying and
Debugging RIP
Operation
Change or cancel filtering the routing
information received from a specified
gateway
Filter the routing information received
Change or cancel filtering routing
information received
Filter routing information received from a
specified gateway and the routing
information received according to
prefix-list
Change or cancel filtering the routing
information received from a specified
gateway and the routing information
received according to prefix-list
Configure filtering the routing information being advertised
Table 484 Filter the Routing Information Being Advertised by RIP
Operation
Filter the routing information being
advertised.
Change or cancel filtering the routing
information being advertised
By default, RIP does not filter any route information received or being advertised.
The attribute specifies the routing domain that can be filtered. At
protocol
present, RIP can filter routes domain such as Connected, Static, OSPF, OSPF-ASE
and BGP. See "Configure Route Filter" of "Configuration of IP Routing Policy" for
details.
This command restores the router to the default RIP configuration.
Perform the following configuration in RIP view.
Table 485 Reset RIP
Operation
Reset RIP
Table 486 Display and Debug RIP
Operation
Display current RIP running status and
global configuration information.
Turn on RIP debugging information

Displaying and Debugging RIP

Command
undo filter-policy gateway
prefix-list-name import
filter-policy {acl-number | ip-prefix
prefix-list-name } import
undo filter-policy {acl-number |
ip-prefix prefix-list-name } import
filter-policy ip-prefix
prefix-list-name gateway
prefix-list-name import
undo filter-policy ip-prifix
prefix-list-name gateway
prefix-list-name import
Command
filter-policy { acl-number |
ip-prefix prefix-list-name } export [
protocol ]
undo filter-policy { acl-number |
ip-prefix prefix-list-name } export [
protocol ]
Command
reset
Command
display rip
debugging rip { packets | receive |
send }
421