Aaa Authentication-Scheme Login - 3Com 3C13618 Command Reference Manual

3Com Command Reference Guide — V1.00
Example
None

2.1.3 aaa authentication-scheme login

Syntax
aaa authentication-scheme login { default | methods-list } { method1 }
[ method2 ... ]
undo aaa authentication-scheme login { default | methods-list }
View
System view
Parameter
default: Default login authentication method list name.
methods-list: Method list name input by the user.
method: Authentication method. There are three authentication methods as
mentioned below:
radius Authentication and accounting via the RADIUS server
local Local authentication, and accounting via the RADIUS server
none
accounting will not be conducted.
Both radius and local authentication need to conduct accounting via the RADIUS
server. If accounting is unnecessary, you don't need to configure the accounting
server, and you use the aaa accounting-scheme optional command to fulfill this
goal.
Only a login service authentication method list can be configured, but you can use
different names. The subsequent authentication method list will cover the previous
one. And the login services using AAA all adopt this method list.
When you are configuring the authentication method list, it is necessary to specify
one authentication method at least. When multiple authentication methods are
specified, method1 is used first during login authentication. If errors occur during the
authentication (like failing to set up communication with the RADIUS server),
method2 is used, and so on. If the authentication fails (resulting in illegal access)
after a certain method is used, the following methods are not used any more and the
authentication is terminated. In addition, the none method is meaningful only when is
placed at the end.
8
All users can access the network without any authentication, and