3Com 3C13618 Command Reference Manual page 854

3Com Router Command Reference Guide — V1.00
Example
# Specify the script "example" to be executed anytime an outgoing call connection is
established.
[3Com-Serial0]script trigger login example
2.1.10 script trigger logout
Syntax
script trigger logout script-name
undo script trigger logout
View
Interface (asynchronous serial interface, AUX or AM port) view
Parameter
script-name: The name of Modem script.
Description
Using the script trigger logout command, you can configure the Modem script that is
executed when a link is reset. Using the undo script trigger logout command, you
can cancel this feature.
By default, no Modem script is configured.
If this command is configured, the specified Modem script will be executed when a
link is reset. For example, reset the Modem when the call on the interface is down.
For related commands, see script-string, start-chat, script trigger login , script
trigger connect , script trigger dial, script trigger init.
Example
# Specify the Modem script that will be executed when the link is reset.
[3Com]script-string drop-line "" +++ OK ATH OK "ATS0=1" OK
[3Com-Serial0]script trigger logout drop-line
2.1.11 script-string
Syntax
script-string script-name script-content
34