Dialer Timer Wait-Carrier; Dialer User - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Example
# Set the timer idle on the interface Serial 0 to 50 seconds.
[3Com-Serial0] dialer timer idle 50

1.1.18 dialer timer wait-carrier

Syntax
dialer timer wait-carrier seconds
undo dialer timer wait-carrier
View
Physical or dialer interface view
Parameter
seconds: Waiting time in seconds, ranges from 0 to 65535. By default, the time
waiting for a call connection is 60 seconds.
Description
Using the dialer timer wait-carrier command, you can configure the timeout time of
wait-carrier timer. Using the undo dialer timer wait-carrier command, you can
restore the default time of the timer.
Wait-carrier timer begins to time after the DCC call is initiated. If the call connection
fails to be set up within the timeout time of this timer, the call will be terminated.
If the connection for a call is not established yet within the specified time, DCC will
terminate the call.
Example
# Set the maximum duration of the time that Serial 0 waits for call to establish to be
100 seconds.
[3Com-Serial0] dialer timer wait-carrier 100

1.1.19 dialer user

Syntax
dialer user username
undo dialer user
18