3Com 3C13618 Command Reference Manual page 804

3Com Router Command Reference Guide — V1.00
Example
# Display the configuration status and statistical information of customized queue on
interface Ethernet 0.
[3Com] display qos wfq interface ethernet 0
Interface: Ethernet0
Weighted Fair queueing:
(Outbound queue:Size/Length/Discards)
WFQ: 0/64/0
Hashed queues: 0/0/256 (Active/Max active/Total)
2.1.6 qmtoken
Syntax
qmtoken token-number
undo qmtoken
View
Interface view
Parameter
token-number: The number of sending tokens, in the range from 1 to 50.
Description
Using the qmtoken command, you can configure the number of QoS sending tokens.
Using the undo qmtoken command, you can disable the sending token function of
QoS.
By default, enable QoS sending token function.
In such operation as FTP transmission, QoS queue may become invalid since the
upper layer provides flow control function. QoS sending token function provides a
kind of traffic control mechanism for the lower layer queue, and the number of
packets sent to the lower layer interface queue can be controlled according to the
number of tokens.
In normal conditions, it is suggested to set the number of sending tokens to 1 during
FTP transmission.
14