Apply Interface; Apply Ip Default Next-Hop - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

6.1.2 apply interface

Syntax
apply
interface type number [type number ]
apply
undo
View
Routing policy view
Parameter
type: Interface type.
number: Interface number.
Description
Using the apply interface command, you can set packet output interface. Using the
undo apply interface command, you can cancel the preset packet output interface.
This command is used to set output interface for the matched IP packets.
For related commands, see apply ip precedence, apply ip next-hop, apply default
interface, apply ip default next-hop.
Example
[3Com-route-policy] apply interface serial 0

6.1.3 apply ip default next-hop

Syntax
apply ip default next-hop ip-address
undo apply ip default next-hop
View
Routing policy view
Parameter
ip-address: IP address of the next hop.
132
interface