X25 Ignore Called-Address; X25 Ignore Calling-Address - 3Com 3C13618 Command Reference Manual

5.1.26 x25 ignore called-address

Syntax
x25 ignore called-address
undo x25 ignore called-address
View
Interface view
Parameter
None
Description
Using the x25 ignore called-address command, you can omit the X.121 address of
the called DTE in outgoing calls while X.25 originates the call. Using the undo x25
ignore called-address command, you can disable the function.
By default, this function is disabled.
According to X.25, the call request packet must carry the address code group. But in
some occasions, the X.25 call request does not have to carry the called/calling DTE
address in a specific network environment or as is required by the application. This
command enables you to specify whether the call request sent by X.25 in the 3Com
series routers carries the called DTE address.
For related commands, see x25 response called-address, x25 response
calling-address, x25 ignore calling-address.
Example
# Prohibiting X.25 interface Serial0 from carrying called DTE address when sending
calling request.
[3Com-Serial0]x25 ignore called-address

5.1.27 x25 ignore calling-address

Syntax
x25 ignore calling-address
undo x25 ignore calling-address
View
Interface view
Parameter
None
Link Layer Protocol
63