L2Tp Domain - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Table 1-2 Description of the fields in display l2tp tunnel
Total tunnels
LocalID
RemoteID
RemName
RemAddress
Sessions
Port

1.1.5 l2tp domain

Syntax
l2tp domain { prefix
undo l2tp domain { prefix
View
System view
Parameter
prefix
-separator
3com.com#yaoxin.
suffix
-separator
yaoxin@3com.com.
delimiters: Identify the domain delimiter; including '%', '@', '# ', and '/'. The string is of
1 to 4 characters.
Description
Using the l2tp domain command, you can configure the delimiter to be a prefix or
suffix. Using the undo l2tp domain command, you can cancel the configured prefix
or suffix delimiter.
By default, no domain delimiters serving as prefixes or suffixes exist.
This command is only used on LAC and it is an optional configuration.
6
Field
| suffix
-separator
-separator
: Indicate that the specified delimiter is a prefix, such as
: Indicate that the specified delimiter is a suffix, such as
Description
Number of tunnels
Local ID uniquely identifying a tunnel
Remote ID uniquely identifying a tunnel
Remote name
Remote IP address
Number of sessions at the tunnel port
Remote port number
} delimiters
-separator
| suffix } delimiters
-separator