Debugging Arp; Display Arp - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Example
# Set the Ethernet MAC address 00-e0-fc-01-00-00 corresponding to the IP address
129.102.0.1 in the LAN and this cache is temporarily valid.
[3Com] arp static 129.102.0.1 00-eo-fc-01-00-00

2.1.3 debugging arp

Syntax
debugging arp
View
All views
Parameter
None
Description
Using the debugging arp command, you can enable the arp packets debugging.
Example
# Enable ARP debugging.
[3Com] debugging arp
# Disable ARP debugging.
[3Com] undo debugging arp

2.1.4 display arp

Syntax
display arp [ verbose [ ip-address ] ]
View
All views
Parameter
verbose: Display the detailed information of ARP mapping table.
12