Dhcp Server Configuration Commands; Debugging Dhcp Server - 3Com 3C13618 Command Reference Manual

Description
Using the vlan-type dot1q vid command, you can configure the Ethernet
sub-interface of VLAN. Using the undo vlan-type command, you can cancel the
existing designations.
The vlan-type dot1q vid command is used on the Ethernet sub-interface. Only after
being configured with this command, can the Ethernet sub-interface insert the VLAN
tag into the Ethernet frame header according to the configured VLAN ID number, and
the exchange interface linked with this network interface can properly handle the
frame received.
Note:
The Ethernet sub-interface is only applied in IPX and VLAN. So, as to a certain Ethernet sub-interface
which has not been configured with VLAN ID, it is not permitted to specify its IP address.
For related commands, see interface ethernet.
Example
# Specify the Ethernet interface Ethernet 0.1 belongs to VLAN 1.
[Quidway-Ethernet0.1] vlan-type dot1q vid 1

2.4 DHCP Server Configuration Commands

2.4.1 debugging dhcp server

Syntax
debugging dhcp server { events | packet | ip-relation }
undo debugging dhcp server { events | packet | ip-relation }
View
All views
Parameter
events: The protocol events of DHCP, including address allocation and data update.
packet: Various protocol packets of DHCP received and sent.
Network Protocol
17