Network Test Tool Commands; Ping - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Enable X25 XOT Event debugging functions
Enable SNMP headers debugging functions
Enable SNMP packets debugging functions
Enable SNMP process debugging functions
Enable SNMP traps debugging functions

4.2 Network Test Tool Commands

4.2.1 ping

Syntax
ping [ip] [ -a ip-address ] [ -c count ] [ -d ] [ -n ] [ -p pattern ] [ -q ] [ -R ] [ -r ] [ -t
timeout ] [ -s packetsize ] [ -v ] [ -o ] [ -f ] { ip-address | host }
View
All views
Parameter
-a ip-address: The source IP address routing.
-c: Count of times that the ICMP ECHO-REQUEST packets is sent, ranging from 1 to
4294967295.
-d: Set socket to DEBUG mode.
-n: Use the host parameter as the IP address without domain name resolution.
-p: Pattern, ICMP ECHO-REQUEST packet filling bit, in the hex format. For example,
-p ff fills all packets with ff.
-q: No other detailed information but statistics is shown.
-R: Record routes.
-r: Transmit Echo-Request packets directly to the connected network without route
selection.
-s: packetsize, The size of the ECHO-REQUEST packet (exclusive of the IP and
ICMP headers), counting in bytes.
-t: Timeout time waiting for ECHO-RESPONSE after ECHO-REQUEST is sent,
counting in ms.
-v: Display non-ECHO-RESPONSE ICMP packets.
-o: Set the TOS field of IP header, in the range of 0 to 7.
68