3Com Command Reference Guide — V1.00
4.1.17 encrypt-card backuped
Syntax
encrypt-card backuped
undo encrypt-card backuped
View
System view
Parameter
None
Description
Using the encrypt-card backuped command, you can enable the host to backup the
crypto card. Using the undo encrypt-card backuped command, you can disable the
host to backup the crypto -cards.
This command is applied to crypto cards.
For the SAs applied at the crypto-card side, the IPSec handling will be shared by the
normal crypto cards. If all the crypto cards are abnormal, no crypto cards can conduct
the IPSec handling. In this case, given that the host has already been enabled to
backup the crypto cards, the IPSec module will replace the crypto cards to conduct
IPSec handling on the packets, if the IPSec module (the operating system main
software) supports the encryption/authentication algorithm used by this SA. If not, the
packets will be discarded.
Example
# Enable the host to backup the crypto cards.
[3Com] encrypt-card backuped
4.1.18 encrypt-card disable
Syntax
encrypt-card disable [ slot-id ]
View
System view
60