Radius Server - 3Com 3C13618 Command Reference Manual

Description
Using the radius retry command, you can configure the times of retransmitting
request packet to RADIUS server. Using the undo radius retry command, you can
restore the default value.
If no acknowledgement is received from the RADIUS server within the timeout value
after an AAA request is sent to the RADIUS server, it is necessary to retransmit the
AAA request. If the number of AAA request times exceeds the specified number of
times, it is deemed that this server can not work normally any more.
Example
# Configure the number of retransmitting request packet to RADIUS server to 2
times.
[3Com]radius retry 2

2.1.19 radius server

Syntax
radius server { hostname | ip-address } [ authentication-port port-number ]
[ accouting-port port-number ]
undo radius server { hostname | ip-address }
View
System view
Parameter
hostname: The RADIUS server name.
ip-address: The RADIUS server ip address (in dotted decimal)
authentication-port: Authentication port number specified. The default value is 1812.
accouting-port: Accounting port number specified. The default value is 1813.
port-number: Monitoring port number of the RADIUS server. 0 indicates that the client
will not use the authentication or accounting function provided by the server.
Description
Using the radius server command, you can configure the host IP address (or
hostname) of the RADIUS server, authentication port number and accounting port
Security
23