Dialer Timer Compete; Dialer Timer Enable - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

1.1.15 dialer timer compete

Syntax
dialer timer compete seconds
undo dialer timer compete
View
Physical or dialer interface view
Parameter
seconds: Idle interval when contention occurs, ranges from 1 to 65535 seconds. By
default, the idle interval is 20 seconds.
Description
Using the dialer timer compete command, you can configure an idle interval for an
interface after call contention occurs on the interface. Using the undo dialer timer
compete command, you can restore the default interval.
Contention occurs if no free channel is available when DCC originates a call. Normally,
after a link is set up, timer idle timing will take effect. However, if a call to a different
destination address is originated on this interface at this time, contention will occur. In
this case, DCC replaces the timer idle timing with the timer compete timing.
Example
# Set timer idle and timer compete respectively to 50 seconds and 10 seconds on
Serial 0.
[3Com-Serial0] dialer timer idle 50
[3Com-Serial0] dialer timer compete 10

1.1.16 dialer timer enable

Syntax
dialer timer enable seconds
undo dialer timer enable
View
Physical or dialer interface view
16