Display Dhcp Server Conflict - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Example
# Set the maximum of the ping packets sent by the server to 5.
[Quidway] dhcp server ping packets 5

2.4.6 display dhcp server conflict

Syntax
display dhcp server conflict [ ip-address ]
View
All views
Parameter
ip-address: The specified IP address. If this parameter is not entered, the statistics of
all the conflict addresses will be displayed.
Description
Using the display dhcp server conflict command, you can view the statistics of the
address conflicts of the DHCP server.
The display dhcp server conflict command displays the conflicting IP address,
conflicting detect type, as well as the time when the address conflict took place.
The system adopts two types of conflict detect mode:
ping mode: The DHCP server uses this method to detect conflicting information.
ARP mode: DHCP client uses this method to detect conflicting information.
For related commands, see reset dhcp server conflict.
Example
# Display the statistics of DHCP address conflicts.
[Quidway] display dhcp server conflict
IP address
10.110.1.8
10.110.1.16
22
Detection Method
Ping Feb 16 2002 16:28 PM
Gratuitous ARP
Detection time
Feb 23 2002 10:30 AM