Apply As-Path; Chapter 5 Ip Routing Policy Configuration; Chapter 5 Ip Routing Policy Configuration Commands - 3Com 3C13618 Command Reference Manual

Chapter 5 IP Routing Policy Configuration

5.1 IP Routing Policy Configuration Commands

5.1.1 apply as-path

Syntax
apply as-path aspath-list-number
undo apply as-path aspath-list-number
View
Routing policy view
Parameter
aspath-list-number: AS path list number, ranging from 1 to 65535.
Description
Using the apply as-path command, you can set the AS attributes of the
advertisement route matching the if-match sub-statement, and attach the AS number
to the beginning of the AS path. Using the undo apply as-path command, you can
cancel the AS number in front of the AS path.
By default, AS number is not configured.
If the conditions for matching in the routing policy are matched, then change the AS
attribute in the route.
Example
# Add a 200 to the autonomous system path of the matched route.
[3Com-route-policy] apply as-path 200
Commands
Routing Protocol
113