Display Encrypt-Card Status - 3Com 3C13618 Command Reference Manual

This command can be used to display the protocol handling conditions of the crypto
card, including the procedure information of the ESP and AH packets processed on
the crypto card. For details, please refer to the following example.
If the input slot-id is larger than the slot-number of the router, the system will prompt
"Invalid encrypt-card slot-id".
For related commands, see reset encrypt-card statistic
Example
# Display the statistical information of crypto card processing.
[3Com] display encrypt-card statistic 3
Encrypt-Card 3 security packets statistics :
input/output security packets: 1461643/1541828
input/output security bytes: 1050464778/1099263354
droped security packet detail:
no enough memory: 0
can't find SA: 0
queue is full: 0
authen is failed: 0
invalid length: 0
replay packet: 377
too long packet: 0
invalid SA: 0
invalid proposal: 0
invalid protocol: 0
buffer error: 0
wrap error: 0
crypto error: 0
pad error: 0

4.1.8 display encrypt-card status

Syntax
display encrypt-card status [ slot-id ]
View
All views
Security
49