Display Firewall - 3Com 3C13618 Command Reference Manual

acl-number: Displaying the access rules whose number are acl-number in the access
control lists being used currently.
Interface: Displaying the serial number of access rules to be applied at the interface.
type: Type of the interface.
number: Number of the interface.
Description
Using the display acl command, you can view packet filter rules and their application
conditions at the interface.
This command is used to display the specified rules and the condition of packet
filtered by the rule. Each rule has a corresponding counter. If a packet was filtered
based on this rule, the counter will increase by 1. By observing the counter, you can
see, among the configured rules, which rules are effective, and which are basically
ineffective.
For related commands, see acl.
Example
# Display the currently used rule with a number of 100.
[3Com]display acl 100
Using the normal packet-filtering access rules now.
100 deny icmp 10.1.0.0 0.0.255.255 any host-redirect(3 matches,252 bytes --
rule 1)
100 permit icmp 10.1.0.0 0.0.255.255 any echo (no matches -- rule 2)
100 deny udp any any eq rip (no matches -- rule 3)
# Display rule application at Serial0.
[3Com]display acl interface serial 0
Serial0:
access-list filtering In-bound packets : 120
access-list filtering Out-bound packets: None

3.1.4 display firewall

Syntax
display firewall
View
All views
Security
31