Snmp-Agent Trap Source - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
undo snmp-agent trap queue-size
View
System view
Parameter
length: Length of message queue, ranging from 1 to 1000. By default, the length is
100.
Description
Using the snmp-agent trap queue-size command, you can configure the length of
the message queue of the traps destined to a host. Using the undo snmp-agent trap
queue-size command, you can restore the default length of the message queue.
The length of the trap queue is set for the purpose of effectively controlling the system
resources. Too long a queue will consume too many system resources, but too short
a queue will probably cause loss of traps. You should set the length of the trap queue
according to the number of traps generated and sent per unit time in the actual
application.
For related commands, see snmp-agent, snmp-agent trap enable.
Example
# Set the length of the message queue of traps to be sent by a host to 200.
[3Com] snmp-agent trap queue-size 200

3.1.23 snmp-agent trap source

Syntax
snmp-agent trap source interface-type interface-number
undo snmp-agent trap source
View
System view
Parameter
interface-type: Interface type.
interface-number: Interface number.
60