Databits - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
netherlands, new-zealand, norway, philippines, poland, portugal, russia, singapore,
southafrica, spain, sweden, switzerland, taiwan, united-kingdom, and united-states.
Description
Using the country-code command, you can configure the coding format of the
Modem connected to the serial interface.
The default area code format is united-states.
In different areas, the coding formats of Modem are different. To adapt to coding
formats in different areas, you can use this command.
On the asynchronous serial interface, only the command modem is enabled, can this
command be configured.
Example
# Set the area-code to china.
[3Com-Serial0]country-code china

3.1.6 databits

Syntax
databits { 5 | 6 | 7 | 8 }
View
Asynchronous serial interface view
Parameter
5: 5 data bits
6: 6 data bits
7: 7 data bits
8: 8 data bits
Description
Using the databits command, you can configure the data bit length of link layer
protocol when asynchronous serial interface works in flow or terminal server (TTY)
mode.
22