L2Tp Match-Order - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
This command can be used on both LAC and LNS, which is a required configuration.
The l2tp enable command is used to enable the VPDN function. The VPN services
can only be carried out after this function is enabled.
For related commands, see l2tp-group.
Example
# Enable the VPDN function on a router.
[3Com] l2tp enable

1.1.7 l2tp match-order

Syntax
l2tp match-order { dnis-domain | dnis | domain-dnis | domain }
undo l2tp match-order
View
System view
Parameter
dnis-domain: Search for the L2TP group according to the dialed number before
according to the domain name.
dnis: Search for the L2TP group according to the dialed number only.
domain-dnis: Search for the L2TP group according to the domain name before
according to the dialed number.
domain: Search for the L2TP group according to the domain name only.
Description
Using the l2tp match-order command, you can configure the searching order of the
dialed number and the domain name criteria. Using the undo l2tp match-order
command, you can restore the default searching order.
By default, the searching is carried out according to the dialed number before
according to the domain name, that is, the key word dnis-domain is adopted.
This command is only used on LAC, and it is an optional configuration.
When there are a large number of L2TP accessing users, searching for the user in
order is time-consuming. In this case, necessary search policy should be set (like the
8