Pad Configuration Commands; Debugging Pad - 3Com 3C13618 Command Reference Manual

For complete copyright credits, enter "copyrights" at the command prompt.
you have mail
Terminal type is vt100
[3Com]
If the exit command is input now, the Rlogin connection can be shut down.
[3Com] exit ↵
connection closed
2.6 X.25 PAD Configuration Commands

2.6.1 debugging pad

Syntax
debugging pad [ packet | error | all ]
undo debugging pad [ packet | error | all ]
View
All views
Parameter
packet: Enable the packet debugging.
error: Enable the error debugging.
all: Enable all the debugging.
Description
Using the debugging pad command, you can enable debugging at all levels. Using
the undo debugging pad command, you can disable the level-corresponding
debugging.
The X.25 PAD related information will be displayed along with the configuration
information on Server end. Based on this information, the user can monitor and
maintain X.25 PAD as well as perform fault diagnosis and troubleshooting.
Example
None
System Management
35