Rip - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Description
Using the reset command, you can reset all system configuration parameters for RIP.
It is used to restore the default RIP configuration when you need to reset the RIP
parameters.
Example
# Reset the RIP system configuration.
[3Com-rip] reset

2.1.13 rip

Syntax
rip
undo rip
View
System view
Parameter
None
Description
Using the rip command, you can enable the RIP and enter the RIP view. Using the
undo rip command, you can disable the RIP. By default, the RIP is closed.
By default, RIP is shut down.
You need to start RIP first. Only when entering the RIP view can you configure the
parameters relevant to RIP.
Example
# Start RIP and enter the RIP view.
[3Com] rip
24