Encrypt-Card Set Syslog; Encrypt-Card Set Time - 3Com 3C13618 Command Reference Manual

[3Com] encrypt-card reset 0

4.1.21 encrypt-card set syslog

Syntax
encrypt-card set syslog { enable | disable } [ slot-id ]
View
System view
Parameter
enable: Enable the realtime report log output
disable: Disable the realtime report log output
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the encrypt-card set syslog command, you can enable or disable the
realtime report log output.
By default, all the realtime report log output of the crypto cards is disabled.
This command is applicable to crypto cards.
After the realtime report log output is enabled, each piece of log information
generated will be output to the terminal, and whether it is displayed is determined by
whether the terminal log display is enabled. During the debugging of the crypto cards,
the log information is helpful for analysis and maintenance. In normal operation, this
function should be disabled.
Example
# Synchronize the time of the operating system of the crypto card on Slot 0.
[3Com] encrypt-card set syslog enable 0

4.1.22 encrypt-card set time

Syntax
encrypt-card set time [ slot-id ]
Security
63