3Com Command Reference Guide — V1.00
Parameter
None
Description
Using the display firewall command, you can view the status of the firewall.
This command is used to display the status of the firewall, for example, whether the
firewall is enabled or not, the timerange packet filtering is enabled or not when the
firewall is enabled, and some statistics about the firewall.
For related commands, see firewall.
Example
# Display the status of the firewall
[3Com] display firewall
Firewall is enable, default filtering method is 'permit'.
TimeRange packet-filtering disable.
InBound : 0 packets, 0 bytes, 0% permitted,
From 19:35:44 to 19:35:49
OutBound: 0 packets, 0 bytes, 0% permitted,
From 19:35:44 to 19:35:49
3.1.5 display isintr
Syntax
display isintr
32
0 packets, 0 bytes, 0% denied,
52 packets, 3679 bytes, 88% permitted defaultly,
7 packets, 469 bytes, 11% denied defaultly;
0 packets, 0 bytes, permitted,
0 packets, 0 bytes, denied,
0 packets, 0 bytes, permitted defaultly,
0 packets, 0 bytes, denied defaultly;
7 packets, 588 bytes, 20% denied,
25 packets, 2100 bytes, 73% permitted defaultly,
2 packets, 168 bytes, 5% denied defaultly.
0 packets, 0 bytes, permitted,
0 packets, 0 bytes, denied,
0 packets, 0 bytes, permitted defaultly,
0 packets, 0 bytes, denied defaultly
Need help?
Do you have a question about the 3C13618 and is the answer not in the manual?