Reverse-Telnet Timeout - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Parameter
from-telnet: Processes the data from the Telnet end.
from-dumb: Processes the data from the terminal end.
Description
Using the reverse-telnet return-deal command, you can configure Reverse Telnet on
the interface to process returns in the data received. For example, if data received is
"0x0d 0x0a", Reverse Telnet will delete the characters "0x0a". Using the undo
reverse-telnet return-deal command, you can restore the default data processing
method of Reverse Telnet, that is, restore the fully transparent transmission of all the
received data.
By default, the interface adopts the transparent transmission mode in the system.
For relevant
reverse-telnet timeout, and reverse-telnet listenport.
Example
# Configure Reverse Telnet to process the data from the Telnet client.
[3Com-Async0] reverse-telnet return-deal from-telnet

2.4.6 reverse-telnet timeout

Syntax
reverse-telnet timeout time
undo reverse-telnet timeout
View
Interface view
Parameter
time: Timeout time of Reverse Telnet, in the range of 30 to 600 seconds.
Description
Using the reverse-telnet timeout command, you can configure the Reverse Telnet
timeout time on the interface. Using the undo reverse-telnet timeout command, you
can restore the default value of the Reverse Telnet timeout time.
By default, no Reverse Telnet timeout time is configured.
30
configurations, see commands reverse-telnet disconnect,