3Com 3C13618 Command Reference Manual page 271

3Com Router Command Reference Guide — V1.00
View
System view
Parameter
x.121-address: the destination X.121 address. This parameter is a pattern matching
character string, with the length ranging from 1 to 30 characters. For detailed
description of pattern matching, see Table 4-5 and Table 4-6.
sub-dest destination-address: substitute destination address.
sub-source source-address: substitute source address.
ip-address1 to ip-address6: the destination IP address connected via XOT. A maximum
of 6 IP addresses can be configured at the same time.
xot-option: the optional XOT tunnel parameter. For detailed configuration, see Table
4-7.
Description
Using the x25 switch svc xot command, you can add an X.25 switching route with the
forwarding address as XOT tunnel. Using the undo x25 switch svc xot command, you
can cancel the specified X.25 switching route.
By default, the X.25 switching route is not configured.
After the user configures the XOT switch command of X.25 SVC, he can implement the
connection between local and remote X.25 nets, spanning the IP net. After configuring
keepalive, it can support the link inspection.
Table 5-10 Optional XOT tunnel parameters
timer seconds
retry times
source interface-type interface-name
For related commands, see x25 switch svc interface, display x25 switch-vc-table
svc, x25 switching.
Example
# Switch virtual circuit1 to the destination ip-address 10.1.1.1
[3Com]x25 switch svc 1 xot 10.1.1.1
78
Option Meaning
The delay of the keepalive timer connected via XOT. When the
timer expires, keepalive packets will be sent to probe if the
connection is functional.
The maximum number of attempts to send keepalive packets.
When it exceeds times, the XOT connection will be broken.
The name of the interface initiating the XOT connection