Dlsw Remote - 3Com 3C13618 Command Reference Manual

Example
None

6.1.12 dlsw remote

Syntax
dlsw remote ip-address [ backup backup-peer-address ] [ priority priority-value ]
[ max-frame max-frame-size ] [ max-queue max-queue-length ] [ linger minutes ]
[ compatible { 3com | nonstandard } ]
undo dlsw remote ip-address
View
System view
Parameter
ip-address: IP Address of the Far-end Peer Entity.
backup backup-peer-address: IP address of the remote backup peer.
priority priority-value: The cost of the far-end peer entity. The value range is 1~5.. By
default, priority is 3.
max-frame max-frame-size: The max frame length. The value available is 516, 1470,
1500, 2052, 4472, 8144, 11407, 11454 and 17800 bytes while the default value is
1500 bytes.. By default, max-frame-size is 1500 bytes.
max-queue max-queue-length: The size of the TCP transceiver queue. The value
range is 50~2000 bytes and the default value is 200 bytes.
linger minutes: The time to keep the connection after the primary peer entity is
disconnected. The value range is 1~1440 minutes and the default value is 5 minutes.
compatible { 3com | nonstandard }: The compatible mode. By default, compatible
mode is nonstandard.
Description
Using the dlsw remote command, you can configure DLSw Remote IP address.
Using the undo dlsw remote command, you can cancel the DLSw Remote IP
address.
You need to configure the remote end peer entity to establish the TCP channel after
configuring the local peer entity. The router will continuously attempt to establish TCP
Network Protocol
105