3Com Router Command Reference Guide — V1.00
2.6.5 nat aging-time
Syntax
nat aging-time { tcp | udp | icmp } seconds
nat aging-time default
View
System view
Parameter
tcp seconds: The time that a TCP connection times out, in the range of 10 to 600
seconds. By default, the valid value is 240 seconds.
udp seconds: The time that a UDP connection times out, in the range of 10 to 600
seconds. By default, the valid value is 40 seconds.
icmp seconds: The time that an ICMP protocol times out, in the range of 10 to 600
seconds. By default, the valid value is 20 seconds.
Description
Using the nat aging-time command, you can configure the valid NAT time. Using the
nat aging-time default command, you can restore the default value.
This command sets up the valid time of address translation connection, different time
for different type of protocol. The unit of time is second.
Example
# Set up the valid connection time of TCP protocol to 240 seconds.
[Quidway] nat aging-time tcp 240
2.6.6 nat outbound address-group
Syntax
nat outbound acl-number address-group pool-name
undo nat outbound acl-number address-group pool-name
View
Interface view
44