Apply Cost; Apply Ip Next-Hop - 3Com 3C13618 Command Reference Manual

5.1.3 apply cost

Syntax
apply cost cost
undo apply cost
View
Routing policy view
Parameter
cost: cost, ranging from 0 to 4294967295.
Description
Using the apply cost command, you can set the cost attributes of the original route.
Using the undo apply cost command, you can cancel the cost attributes of the
original route.
By default, no cost is defined
If the match conditions in the Route-policy are matched, then change the cost
attribute of the send route.
Example
# Set the cost value for the original route.
[3Com-route-policy] apply cost 10

5.1.4 apply ip next-hop

Syntax
apply ip next-hop ip-address
undo apply ip next-hop
View
Routing policy view
Parameter
ip-address: Next hop address.
Routing Protocol
115