Display Ipsec Sa - 3Com 3C13618 Command Reference Manual

3com 3c13618: reference guide
Table of Contents

Advertisement

4.1.13 display ipsec sa

Syntax
display ipsec sa { all | brief | remote ip-address | policy policy-name
[ sequence-number ] | parameters dest-address protocol spi }
View
All views
Parameter
all: Displaying information about all the SAs.
brief: Displaying brief information about all the SAs.
remote: Displaying information about the remote address.
ip-address: Specifying the remote address whose IP address format is A.B.C.D.
policy: Displaying information about the SA in the IPSec policy group whose name is
policy-name.
parameters: Displaying information about a SA uniquely identified by the destination
address, protocol, and SPI.
dest-address: Specifying the destination address, in the IP address format of
A.B.C.D.
protocol: Specifying a protocol by inputting the ah or esp key word without case
discrimination.
spi: Specifying security parameter index (SPI).
Description
Using the display ipsec sa command, you can view the relevant information about
the SA.
This command is applicable to the IPSec module of the operating system.
brief command displays brief information about all the SAs, whose display format is
the brief format (see the following example). The brief command can be used to
quickly display all the SAs already set up. Brief information includes source address,
destination address, SPI, protocol, and algorithm. A display beginning with E in the
algorithm stands for the encryption algorithm, and a display beginning with A stands
for the authentication algorithm.
Security
55

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3C13618 and is the answer not in the manual?

This manual is also suitable for:

3c136123c136133c13616

Table of Contents