Apply Local-Preference - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
Description
Using the apply ip next-hop command, you can set the next hop of the source route
matching the if-match sub-statement. Using the undo apply ip next-hop command,
you can cancel the configuration of modifying the next hop of the route.
By default, not to set the next hop of the route.
If the match conditions in the routing policy are matched, then change the next-hop
attribute of the send route.
Example
# Modify the IP address of the next hop of the source route which matches the rule
defined by if-match clause.
[3Com-route-policy] apply ip next-hop 10.0.0.1

5.1.5 apply local-preference

Syntax
apply local-preference value
undo apply local-preference
View
Routing policy view
Parameter
value: New local preference, ranging from 0 to 4294967295.
Description
Using the apply local-preference command, you can set the local preference value
of source route. Using the undo apply local-preference command, you can cancel
the local priority attributes setting of the source route.
By default, no local preference is defined.
If the match conditions in the Route-policy are matched, then change the local
preference attribute in the send route.
Example
# Set the local preference value of source route.
116