Sysname - 3Com 3C13618 Command Reference Manual

Description
Using the setup command, you can interactively configure the basic parameters
necessary for the running of the router.
When a certain parameter is to be configured, and if this parameter is found already
configured, then its current value is shown as a default value. You can press Enter
without modifying it.
When you power on and boot the router for the first time, the system will
automatically execute the setup command to guide you in configuring the parameters
necessary for running the router. These parameters include:
Router domain name
User password
SNMP parameter
Selection of network protocols such as IP and IPX
IP addresses and IPX network numbers at the interfaces
In addition, the administrator user can execute the setup command at any point.
Example
# Guide the user in configuring the basic parameters of the router.
[3Com] setup

1.2.12 sysname

Syntax
sysname sysname
View
All views
Parameter
sysname: Name of the router, in the format of 1 to 20 characters.
Description
Using the sysname command, you can configure or change the router name that is
shown in the view prompt.
By default, the sysname is "3Com".
For related commands, see display sysname.
Getting Started
13