3Com 3C13618 Command Reference Manual page 66

3Com Router Command Reference Guide — V1.00
v2c: Use version SNMPv2c.
v3: Use version SNMPv3.
authentication: Authenticate packets but not encrypt them.
noauthentication: Not to authenticate or encrypt packets.
privacy: Authenticate and encrypt packets.
groupname: SNMP group name, in the range of 1 to 32 bytes.
read-view readview Set the read-only view.
write view writeview: Set the read-write view.
notify view notifyview : Set the notification view.
acl acl: Specify a crypto access list, which must be a standard access list ranging
from 1 to 99, for the group.
Description
Using the snmp-agent group command, you can configure a SNMP group. Using the
undo snmp-agent group command, you can cancel a specific SNMP group.
By default, no SNMP group is configured.
By default, SNMP group has only the real-only authority. The read-only view name is
"ViewDefault", that is, the default configuration is read-view "ViewDefault".
Configuring a SNMP group is to map a SNMP group to a MIB view and the user to the
SNMP group. Use the snmp-agent usm-user command to configure the user name.
A maximum of 20 groups can be configured.
For related commands, see snmp-agent, snmp-agent usm-user , snmp-agent
mib-view, display snmp-agent group.
Example
# Create a SNMP group named group 1
[3Com] snmp-agent group v1 group1
# Delete the SNMP group group1.
[3Com] undo snmp-agent group v1 group1
50