Sdlc Sap-Map Remote; Sdlc Simultaneous - 3Com 3C13618 Command Reference Manual

6.1.36 sdlc sap-map remote

Syntax
sdlc sap-map remote dsap sdlc-addr
undo sdlc sap-map remote dsap
View
Synchronous interface view
Parameter
dsap: SAP address of the specified DLSw opposite end equipment. By default, dsap
of LLC2 is 04.
sdlc-addr: SDLC address.
Description
Using the sdlc sap-map remote command, you can configure SDLC to transform
the SAP address of LLC2. Using the undo sdlc sap-map remote command, you can
restore the default value of the SAP address of LLC2.
Generally, the SAP address used by the SNA protocol is 0x04, 0x08 or 0x0C.
Example
None

6.1.37 sdlc simultaneous

Syntax
sdlc simultaneous
undo sdlc simultaneous
View
Synchronous interface view
Parameter
None
Network Protocol
123