# Disable the module-based filter function, that is, enable output of log information
from all modules.
[3Com] undo info-center console filter
4.3.3 info-center enable
Syntax
info-center enable
undo info-center enable
View
System view
Parameter
None
Description
Using the info-center enable command, you can enable the log function. Using the
undo info-center enable command, you can disable the log function.
By default, log function is disabled.
Only after the log system is turned on via this log command can log information be
output to the Console, Telnet terminal, dummy terminal, buffer in the router, and log
host.
For related commands, see display info-center.
Example
# Disable the log function.
[3Com] undo info-center enable
4.3.4 info-center logbuffer
Syntax
info-center logbuffer [ size ] [ English | Chinese ] [ emergencies | alerts | critical |
errors | warnings | notifications | informational | debugging ] [ filter [ facility1
facility2 ... ] ]
System Management
77
Need help?
Do you have a question about the 3C13618 and is the answer not in the manual?