Apply Origin; Apply Tag - 3Com 3C13618 Command Reference Manual

[3Com-route-policy] apply local-preference 200

5.1.6 apply origin

Syntax
apply origin { igp | egp as-number | incomplete }
undo apply origin
View
Routing policy view
Parameter
igp, egp as –number and incomplete are new Origin attributes.
Description
Using the apply origin command, you can set the origin attribute of the original route
in the Route-policy. Using the undo apply origin command, you can cancel the
configuration of setting the origin attribute of the original route in the Route-policy.
By default, no origin is set.
If the match conditions in the Route-policy are matched, then change the Origin
attribute in the send route.
Example
# Set the origin attribute of the original route in the Route-policy.
[3Com-route-policy] apply origin igp

5.1.7 apply tag

Syntax
apply tag tag-value
undo apply tag
View
Routing policy view
Routing Protocol
117