Display X25 Alias-Policy - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
event: Enable the XOT event debugging information output.
packet: Enable the XOT packet debugging information output.
Description
Using the debugging x25 xot command, you can enable the XOT debugging
information output.
By default, all the XOT debugging information output is disabled.
Example
None

5.1.4 display x25 alias-policy

Syntax
display x25 alias-policy
View
All views
Parameter
None
Description
Using the display x25 alias-policy command, you can view all the aliases set for all
the X.25 interfaces.
For related commands, see x25 alias-policy.
Example
# Display the X.25 alias table.
[3Com]display x25 alias-policy
Alias for Serial0:
Alias for Serial1:
Alias-1: $20112405$
Alias-2: $20112450
Alias-3: 20112450$
The above information indicates that, no alias is set for Serial0; 3 aliases are set for
Serial1, and they are $20112405$ (matching mode: strict), $20112405 (matching mode:
left alignment), and 20112405$ (matching mode: right alignment).
44
strict
left
right