Snmp-Agent - 3Com 3C13618 Command Reference Manual

View
All views
Parameter
Name: Username.
Description
Using the display snmp-agent usm-user command, you can view information on all
SNMP users that have been configured.
You can use the snmp-agent usm-user command to specify a SNMP user.
For related commands, see snmp-agent usm-user.
Example
# Display information on all the active users.
[3Com] display snmp-agent usm-user
User name: 8040
Engine ID: 800007DB0300E0FC01A47A
UserStatus:active
Access-list:3

3.1.10 snmp-agent

Syntax
snmp-agent
undo snmp-agent
View
System view
Parameter
None
Description
Using the snmp-agent command, you can enable the SNMP (Simple Network
Management Protocol) service. Using the undo snmp-agent command, you can
disable the SNMP service.
System Management
47