Mfr Timer Hello; Mfr Window-Size - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
[3Com-Serial0]mfr timer ack 6

6.1.54 mfr timer hello

Syntax
mfr timer hello seconds
undo mfr timer hello
View
Serial interface view
Parameter
seconds: Time interval for the bundle link to send Hello messages, in the range of 1 to
180 seconds. By default, it is 10 seconds.
Description
Using the mfr timer hello command, you can configure the time interval for the bundle
link to send Hello messages. Using the undo mfr timer hello command, you can
restore the default time interval for the bundle link to send Hello messages.
Each link of the multilink Frame Relay maintains one Hello timer. When the Hello timer
times out, the local end will send a Hello message to the remote end, then the remote
end response the message.
Only after you use the command link-protocol fr mfr to associate the Frame Relay
bundle link interface with the Frame Relay bundle, can this command be configured.
For related commands, see mfr timer ack, mfr retry.
Example
# Set the bundle link send a Hello message every 30 seconds.
[3Com-Serial0]mfr timer hello 30

6.1.55 mfr window-size

Syntax
mfr window-size number
View
MFR Interface view
Parameter
number: The number of the fragmentations to be configured, in the range from 1 to 16.
134