Nbns-List - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
using this command several times, because the IP address of the new outgoing
gateway will not superimpose upon the old one, but overwrite it.
Example
# Set the outgoing gateway router corresponding to No.0 DHCP address pool to
10.12.1.99.
[Quidway-dhcp0] gateway-list 10.12.1.99

2.4.15 nbns-list

Syntax
nbns-list ip-address1 [ ip-address2 ... ip-address8 ]
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameter
ip-addressX: The IP address of the NetBIOS server, X=1,2, ...8.
all: all ip-addresses.
Description
Using the nbns-list command, you can configure the IP address of NetBIOS server
on a DHCP client. Using the undo nbns-list command, you can cancel the IP
address allocated to the NetBIOS server on the DHCP client.
By default, no IP address of NetBIOS is configured.
Client computers can communicate through the NetBIOS protocol. As for the client
computers using the Microsoft operating system, WINS (Windows Internet Naming
Service) server will provide the host-name-to-IP-address resolution mechanism for
the hosts adopting the NetBIOS protocol to communicate. Therefore, WINS setting is
necessary for most network clients using Windows.
At present, a maximum of 8 IP addresses of the NetBIOS server can be configured
for each DHCP address pool.
For related commands, see dhcp server ip-pool, netbios-type.
30