Vrrp Vrid Priority; Vrrp Vrid Timer-Advertise - 3Com 3C13618 Command Reference Manual

Example
# Set the router to work in preemption mode, with the delay time being 5 seconds.
[3Com-Ethernet0]vrrp vrid 1 preempt-mode timer-delay 5

2.1.5 vrrp vrid priority

Syntax
vrrp vrid virtual_router_id priority priority
undo vrrp vrid virtual_router_id priority
View
Ethernet interface view
Parameter
virtual_router_id: Virtual Router ID, namely, VRRP backup group number, ranging
from 1 to 255.
priority: Priority value of the router in backup group, in the range from 1 to 254. By
default, the priority is 100.
Description
Using the vrrp vrid priority command, you can configure the priority of a router in the
backup group. Using the undo vrrp vrid priority command, you can restore the
default value of priority.
Priority determines the position of a router in the backup group. A higher priority
means that the router has more possibility to become MASTER. Priority 0 is reserved
for some special usage by the system and 255 is reserved for IP address owner.
Example
# Set the priority of a router in backup group 1 to 150.
[3Com-Ethernet0]vrrp vrid 1 priority 150

2.1.6 vrrp vrid timer-advertise

Syntax
vrrp vrid virtual_router_id timer-advertise seconds
undo vrrp vrid virtual_router_id timer-advertise
Reliability
13